AMA Size Guide

Sizer

 

To get the best results, you will need to go to the printing option" before printing and ensure that the "page scalling" option is set to "none" in the print dialogue box. The AMA Wrist Sizer must be printed on a full letter size (8 1/2  X 11 inches) page. To check that the Wrist Sizer has been printed properly, take a ruler and meassure the sample below. It should measure exactly 2 cm.

  • Cut out the paper Wrist Sizer and follow the instrutions below.
  • Make sure that the numbers are on the outside of the paper Wrist Sizer and insert the pointed end through the opening you have cut at the other end of the Wrist Sizer where indicated (cut here). Place your hand through thw Writ Sizer and pull the pointed end until it fits confortably on your wrist.
  • The number that lines up with the edges of the opening is the size of the wrist.
  • You can also use a tape measure but if you do not have one, take any small piece of ribbon or cord. Wrap it aroundyour wrist and measure the length against a ruler.

 

Once you have found your size in the Bracelet Sizing Chart. AMA recommends matching it exactly to our product options, as we size them specifically to your needs. If you´re looking for a more loose fit, choose one size up from you obtained size.

Please note that the AMA Wrist Sizer is an indicative guide only and therefore may not be an exact measure, depending on its proper application and use. 

 

 

size guides

To determine your size, we strongly advise that you measure the size of your finger rather than the size of your ring.

  • Using a length of string or ribbon, wrap it around the base of your finger. To ensue the ring fits comfortable, we suggest measuring your knuckle as well. We recommend selecting a size that will slide on and your finger easily
  • With a pen, mark the point on the string where the ends meet.
  • Measure the string in millimeters with a ruler.
  • Choose the closest measurement to the chart below to identify your ring size.

 

  • The string or ribbon must fit snugly to produce an accurate size. Finger size can change depending on the time of day and weather, for the most accurate measurement, measure your finger at different times of the day, and on different days to compare. Avoid measuring your fingers when they are cold or wet, as they will be at their smallest.

To get the best results, you will need to go to the "printing settings" before printing and ensure that "page scaling" option is set to "none" in the print dialogue box. The AMA Ring Size Chart must be printed on a full letter "A4 (8 1/2 x 11 inches) size page. To check that the Ring Size Chart has been printed properly, take a ruler and measure the sample below. It should measure exactly 0.7 inches.

 

Once you have found your size in the Ring Sizing Chart, AMA recommends matching it exactly to our product options as we size them specifically to your needs. If you're looking for a more loose fit, choose one size up from your obtained size. Compare your measurment to our universal guide and you´ll be good to go!

Please note that the AMA Wrist Sizer is an indicative guide only and therefore may not be an exact measure, depending on its proper application and use.